• Product type: Threaded steel/steel
• Material rivet body: Steel, zinc-plated
• Material mandrel: Steel, zinc-plated
• Head diameter Ø: 5.0 | 6.0 [mm]
• Hole diameter Ø: 3.1 | 4.1 [mm]
• Rivet body length: Please refer to cataloger
Contact us on email@example.com for best price now!
Follow us on: https://www.facebook.com/gsphk
THREADED BLIND RIVETS
Threaded blind rivets have a stud bolt with an outside thread, to which further parts can be fitted using an additional nut.
The blind rivet connection itself is a permanent connection.
However to attach further detachable parts, GESIPA® has
the threaded blind rivet in its range. The threaded
blind rivet has a stud bolt with an M5 or M6 outer thread
to which other parts can be attached using an additional
nut. The GESIPA® blind rivet stud range is listed on page
204 for parts that need greater clamping forces.
MADE IN GERMANY
Tools and fasteners that are
Made in Germany. At our three
German locations, we manufacture
top-quality blind rivets
and setting tools for international
What Is A Blind Rivet?
A blind rivet consists of two parts: the hollow rivet and the mandrel body. The hollow rivet has a setting head and a rivet body. The setting head is located on the processing side and is available with a range of diameters and in different forms. The head variants are as follows: dome head, countersunk and large flange. The rivet body comes in different lengths that will depend on the thickness of the material to be riveted. The job of the mandrel body is to deform the rivet body. It has a predetermined breaking point, at which the mandrel body breaks off once the rivet has been deformed sufficiently. The filling section is the portion of the mandrel body that is left behind in the hollow rivet. The spent mandrel is the portion of the mandrel body that is removed from the set rivet using the blind riveting tool and disposed of.
How To Installing?
During the setting process, the mandrel body is moved using the setting tool jaws, deforming the hollow rivet until it is firmly positioned in the component as predefined. In the end, the mandrel body breaks off at the specified point (the predetermined breaking point) and can be disposed of via the recycling system. The rest mandrel is the spent mandrel left behind in the hollow rivet and can provide an additional locking function depending on the application in question.